Hi all!
I’ve just had a aux input put into the G1000 (for music…) but the volume is too low for it to be usable in flight. I entered maintenance mode (by holding down ‘enter’ during boot if I remember correctly…), but where do I go from there? I’ve searched but can’t find any menu / option to set input volume.
Thanks!
I have done a search in the G1000 maintenance manual and came across only the settings MUSIC #1 and MUSIC #2 in the HEADSET VOLUME on the GMA configuration page. GMA configuration page should be right but not sure whether they are the settings I mentioned.
Wolfgang
Thanks Wolfgang.
Does anyone else know anything about this?
For anyone who has this issue in the future:
Enter setup mode (hold enter while booting) on the G1000 PFD (my mistake was to do it on the MFD, I thought they’d share configuration) – from there it pretty obvious.
Does that mean it worked for you?
It did! Works very well
