Menu Sign In Contact FAQ
Banner
Welcome to our forums

KY 196A TSO Installed and static

I will not fill out the form 337, someone else will have too. I doubt this this is even safe to fly.

newbie in a pickle

You don’t just “fill out the Form 337” unless it is a fake one

Administrator
Shoreham EGKA, United Kingdom

Avichick wrote:

fix it and fill out the form 337

Sounds like you’re in the US ?

FAA A&P/IA
LFPN

OK. So we have a reversed polarity, and the new systems are pulling to much power from the old alternator. Boss decided to have the people who first started this and wired some things backwards to fix it and fill out the form 337. Thank you very much for the assistance, and I don’t think I will allow myself in a situation of mid project solo tech again. Lesson learned!

And thank you so much for all the warm welcomes.

newbie in a pickle

Avichick wrote:

I tried that to no avail.

Sorry but that is not a good answer. Either it made a difference, in which case the issue is with the antenna, or the antenna cable. Or it made no difference, in which case the issue is with the radio.

EBZH Kiewit, Belgium

Avichick,

I’m afraid that I can’t help you at all, but would just like to welcome you to the forum
Presumably you are one of the many Peter says reads the the forum but doens’t post. Welcome to the other side!

Colm

EIWT Weston, Ireland

Avichick wrote:

I hate sloppy work

You will see lot’s of that in old, GA aircraft, sigh. Seems most GA avionics after-market fits are of the “Dyke & Run” variety.

The KY196 is a very robust VHF and has no particular quirks or problems.

I would start by finding another acft with same and swapping units, then work from there.

Also: Are you SURE the squelch isn’t pulled ?

FAA A&P/IA
LFPN

@Jan_Olieslagers
I tried that to no avail. I did find however; that the 8 day clock was throwing 12v straight to ground on the same post as my comms. That has been fixed but the issue persists.

@wigglyamp
Not at the moment I don’t. I would like to get one, just not sure of the brand. I have done the continuity checks and everything comes up normal on the antenna and cables. So I’m back to square one.

Thank you to every one who has commented so far.

newbie in a pickle

Very sorry, that was pretty rude of me. I’m pretty one track minded when it comes to something being wrong with my avionics equipment. I’ll even dream about the issue. I’m new to civilian aviation and in school to get my A&P. My exp is 5 years avionics/military only so this is quite a change for me. I hate sloppy work and love my research! Anything else you want to know feel free to ask and I will answer the first chance I get.

newbie in a pickle

@Avichick – Looks like your first post on EuroGA – you might want to introduce yourself before asking for Free Technical Assistance

FAA A&P/IA
LFPN
13 Posts
Sign in to add your message

Back to Top