Menu Sign In Contact FAQ
Banner
Welcome to our forums

FAA increases weight limit of light sport aircraft by a factor of 3

As I see it, there is no NPRM at the moment and unlikely to be before the end of the year.

The Light Sport Aircraft definition in 14 CFR part 1.1 has a lot more to it than gross weight, so it remains to be seen what other concessions will be proposed.

That would make a lot more aircraft available to sport pilots. I presume existing LSAs would have to get their limitations revised to permit higher gross weights and that process could be different depending on the certification class, factory or amateur built.

They also alluded to opening up more experimental kits to be professionally built, which could formalise what is already happening more covertly.

Unless they give more detail to the proposal, there’s still a lot to be decided.

KHWD- Hayward California; EGTN Enstone Oxfordshire, United States

All this is going to take a lot more time than a few months. And for manufacturers is may be an opportunity in the long run, but for now worrying as buyers may want to wait and see..
https://www.bydanjohnson.com

Private field, Mallorca, Spain

Silvaire wrote:

The most important implication is the end of private pilot medicals for pilots flying most FAA registered ‘non-complex’ light aircraft in the US.

I think that’s the main impact for GA. Thus, it won’t be of big effect in Europe, because there is no comparable pilot license for “LSA only”. On a certification level, going LSA instead of CS-23 doesn’t make any significant difference, on the contrary.

mh
Aufwind GmbH
EKPB, Germany

mh wrote:

Thus, it won’t be of big effect in Europe

No? How is an LSA RV-10 (built at some “factory”) or LSA Carbon Cub (also built by some “factory”) going to be exported and sold in Europe? Or any other similar-ish performing aircraft. They are no longer experimental since they are not following the 51% rule, and there is no way to certify them. It’s good for European manufacturers exporting to the US, but without a home market that is problematic.

EASA better get their heads out of their buts. If anything this shows how little progressive EASA is. We have LAPL and ELA(1/2)/VLA, but none of that really changes anything in a practical sense as things are today.

The elephant is the circulation
ENVA ENOP ENMO, Norway

1. The CarbonCub already fits CS-LSA. How many are registered in Europe? How many other US LSA are registered in Europe? And how many European designs take off in the US?
2. The RV10 does not fit into the proposed FAA LSA class (too fast cruise, too fast stall, and probably a CS-prop fitted
3. Because EASA is way better regime in Part-21 than the FAA, we do see most advances in Europe, not in the US. (e.g. new engines, new airframes, new materials, etc.)
4. National anemosities are pulling the handbrake on production aircraft, not EASA. But you already know that.
5. FAA LSA needs to be recertified to Eurpean standards, if you want a European TC.

mh
Aufwind GmbH
EKPB, Germany

National anemosities are pulling the handbrake on production aircraft

Could you describe these?

Administrator
Shoreham EGKA, United Kingdom

Peter wrote:

Could you describe these?

You need the production organisation approval from your national CAA.

mh
Aufwind GmbH
EKPB, Germany
  1. only the LSA version fits LSA. All the others do not, way too heavy (MTOW)
  2. we don’t know that as of yet. According to Dan in the link above, the “certification” will be much more fluid. A single lever controller is the best and safest for instance.
    3 4 5 : not sure what you mean.
The elephant is the circulation
ENVA ENOP ENMO, Norway
18 Posts
Sign in to add your message

Back to Top