I received a letter from the FAA International Field Office for the EMEA in Frankfurt is being shuttered.
All A&Ps and DARs will be reporting to the FSDO/IFO in Dallas .
Doubt this has any direct impact on Euro based N reggies, but it may have reperucussions with the A&P/IA and DARs based in Europe.
I’ve already heard a rumor that DARs may be charged by the FAA for their annual audits to cover travel costs. This ultimatly could impact their already hefty fees.
I wonder if the recent FAA-EASA treaty is behind this?
What is the actual procedure for keeping the A&P & IA valid in Europe?
The procedure is the same for all A&P/IAs all over the world, the FAA makes no distinction on where the Airman exercises his/her priveleges, same as pilots.
Here’s the relevant FARs :
Sec. 65.92
Inspection authorization: Duration.
(a) Each inspection authorization expires on March 31 of each odd-numbered year. However, the holder may exercise the privileges of that authorization only while he holds a currently effective mechanic certificate with both a currently effective airframe rating and a currently effective powerplant rating.
(b) An inspection authorization ceases to be effective whenever any of the following occurs:
(1) The authorization is surrendered, suspended, or revoked.
(2) The holder no longer has a fixed base of operation.
(3) The holder no longer has the equipment, facilities, and inspection data required by §65.91(c) (3) and (4) for issuance of his authorization.
(c) The holder of an inspection authorization that is suspended or revoked shall, upon the Administrator’s request, return it to the Administrator.
Sec. 65.93
Inspection authorization: Renewal.
(a) To be eligible for renewal of an inspection authorization for a 2-year period an applicant must present evidence during the month of March of each odd-numbered year, at an FAA Flight Standards District Office or an International Field Office, that the applicant still meets the requirements of §65.91(c) (1) through (4). In addition, during the time the applicant held the inspection authorization, the applicant must show completion of one of the activities in §65.93(a) (1) through (5) below by March 31 of the first year of the 2-year inspection authorization period, and completion of one of the five activities during the second year of the 2-year period:
(1) Performed at least one annual inspection for each 90 days that the applicant held the current authority; or
(2) Performed at least two major repairs or major alterations for each 90 days that the applicant held the current authority; or
(3) Performed or supervised and approved at least one progressive inspection in accordance with standards prescribed by the Administrator; or
(4) Attended and successfully completed a refresher course, acceptable to the Administrator, of not less than 8 hours of instruction; or
(5) Passed an oral test by an FAA inspector to determine that the applicant’s knowledge of applicable regulations and standards is current.
(b) The holder of an inspection authorization that has been in effect:
(1) for less than 90 days before the expiration date need not comply with paragraphs (a)(1) through (5) of this section.
(2) for less than 90 days before March 31 of an even-numbered year need not comply with paragraphs (a)(1) through (5) of this section for the first year of the 2-year inspection authorization period.
(c) An inspection authorization holder who does not complete one of the activities set forth in §65.93(a) (1) through (5) of this section by March 31 of the first year of the 2-year inspection authorization period may not exercise inspection authorization privileges after March 31 of the first year. The inspection authorization holder may resume exercising inspection authorization privileges after passing an oral test from an FAA inspector to determine that the applicant’s knowledge of the applicable regulations and standards is current. An inspection authorization holder who passes this oral test is deemed to have completed the requirements of §65.93(a) (1) through (5) by March 31 of the first year.
Sec. 65.95
Inspection authorization: Privileges and limitations.
(a) The holder of an inspection authorization may—
(1) Inspect and approve for return to service any aircraft or related part or appliance (except any aircraft maintained in accordance with a continuous airworthiness program under part 121 of this chapter) after a major repair or major alteration to it in accordance with part 43 [New] of this chapter, if the work was done in accordance with technical data approved by the Administrator; and
(2) Perform an annual, or perform or supervise a progressive inspection according to §§43.13 and 43.15 of this chapter.
(b) When he exercises the privileges of an inspection authorization the holder shall keep it available for inspection by the aircraft owner, the mechanic submitting the aircraft, repair, or alteration for approval (if any), and shall present it upon the request of the Administrator or an authorized representative of the National Transportation Safety Board, or of any Federal, State, or local law enforcement officer.
(c) If the holder of an inspection authorization changes his fixed base of operation, he may not exercise the privileges of the authorization until he has notified the FAA Flight Standards District Office or International Field Office for the area in which the new base is located, in writing, of the change.
Note: The above is stricly for A&Ps WITH Inspection Authorisation which does not apply to all A&Ps .
I wonder if the recent FAA-EASA treaty is behind this?bq.
Maybe, but they were servicing a much greater area than just EASAland.
