I don’t have it, but i flew the Sim for a couple of hours. I would say a 900 m runway will be perfectly fine for private operations.
See post #1!
Jets, even SE, require ASDA calculations? This would be the first non Annex 2/Permit single engine jet so assume this would apply, implying 900m might be on the tight side.
The table feels somewhat marketing inspired, you might find your budget for brakes has just gone up. Not sure how the reverse thrust plans to work, but given the design it may not be as effective as other business jets.
My answers assume, Cirrus uses Part 23 for certification in normal category.
Jets, even SE, require ASDA calculations?
Only ME jets heavier than 6000lbs require it according to 14 CFR 23.55
Not sure how the reverse thrust plans to work, but given the design it may not be as effective as other business jets.
Well at least for the published distance, reverse is not allowed according to 14 CFR 23.75 so it might only help to reduce tear and wear onthe brakes. ;-)
I believe this to be a reliable source, longstanding option holder: I understand certification will be complete in ten days.
They will quickly roll out upgrades presumably with RVSM being an early upgrade. The option value of the early reserves appears to be $500k plus.
They think through both the engineering and marketing so I think this is likely to be a successful type.
Now certified and deliveries starting in Dec. Apparently there is a video out there showing the SF50 deploying the chute… would love to see it.
Nice Xmas present for some
Off topic … Am i the only one confused when reading combined threads such as this one with 513 posts, but post numbering is out of sync? Hard to navigate (and order descending/ascending) and knowing where you are.
Jonas
The posts are still in the correct order. It is only the numbering which has gone wrong.
Also the page numbering is correct:
Unfortunately the loss of post numbers is a bug. These things are not trivial to fix if you want to preserve previously made links to particular posts.
As to why merge, I have been merging threads which
But I do this only if I can find the time because I don’t have a function for transferring a whole thread into another one.
A better way to do this would be for everyone to use the search function before starting a very similar thread.
Have deliveries started now? Looking foward to the first real pilot reports.